ACHETEZ MAINTENANT, PAYEZ PLUS TARD. À partir de 0% TAEG en savoir plus
×
Épuisé
527-511 Suspension Control Arm and Ball Joint Assembly Dorman - OE Solutions Canada
Cliquez pour zoomer

Avoir des questions?

  • Garantie de compatibilité à 100 %

    Utilisez notre outil de confirmation de compatibilité pour la vérification de la compatibilité

  • experts en pièces automobiles

    Nous connaissons nos pièces automobiles, nos pneus et nos roues

  • Expédition rapide le jour même

    Consultez le calendrier pour une livraison rapide. La plupart des commandes sont expédiées le jour même

  • Satisfaction du client

    La satisfaction du client est notre priorité n°1

Suspension Control Arm and Ball Joint Assembly

Dorman - OE Solutions
527-511
$315.00 CAD

Suspension Control Arm and Ball Joint Assembly
Suspension Control Arm And Ball Joint Assembly
SUSPENSION CONTROL ARM AND BALL JOINT ASSEMBLY
Water resistant - to help prevent moisture intrusion that causes the OE ball joint to creak and fail, the ball joint is protected by a completely sealed housing
Stronger arm - unlike the Tesla fiber-reinforced plastic design arm assembly, this control arm is a much stronger forged steel insert riveted to a stamped steel control arm
Better repair - this improved control arm assembly is engineered by the aftermarket leader in suspension components to match the fit of the factory assembly but exceed OE performance and durability
Upgraded design - this front upper left control arm assembly features a forged steel housing and sealed ball joint designed to provide greater strength and reliability than the factory assembly
On certain Tesla Model X SUVs, the front upper left control arm can crack and separate from the steering knuckle, often without warning and under normal driving conditions. This can cause a sudden and unexpected loss of steering control. The original equipment design also uses a plastic cap over the ball joint that tends to trap moisture accumulation. That can cause an increasingly frequent creaking sound in the vehicle's front end and ultimately cause the joint to fail. This Dorman OE FIX upper front suspension control arm and ball joint assembly addresses these costly and dangerous potential failure points so vehicle owners can opt for a more permanent repair than offered by the factory design. Unlike the Tesla plastic arm assembly, our upgraded arm design prevents stress cracks and knuckle separation by utilizing a much stronger forged steel ball joint housing with a stamped steel arm attached by sturdy rivets. To help prevent damaging corrosion and moisture intrusion, this design eliminates the plastic cap to allow water to evaporate, the arm is electrostatically coated. and the ball joint is protected by a completely sealed housing. Precision engineered and manufactured to help provide many miles of reliable service, this improved control arm assembly is designed to exactly match the fit of the factory assembly, but far exceed its performance and durability.
Afficher plus
Afficher moins
Ball Joint Stud Type
Pinchar
Ball Joint Included
Yes
Ball Joint Mounting Type
Bolt In
Ball Joint Mounting Type
Tornillo
Control Arm Construction
Stamped
Control Arm Maximum Length
358.5
Mounting Hardware Included
Package Contents
1 Ball Joint
Package Contents
1 Control Arm
Control Arm Material
Steel
Control Arm Color
Black
Package Contents
1 Nut
Tipo de brazo de control
Estampado
Ball Joint Stud Type
Pinch
Control Arm Maximum Width
316
Control Arm Color
Negro
Pre-Greased
Oui
Pre-Greased
Bushings Included
Oui
Control Arm Type
Stamped
Grade Type
Reemplazo estándar
Control Arm Material
Acero
Mounting Hole Diameter
10.3
Pre-Greased
Yes
Bushings Included
Bushings Included
Yes
Grade Type
Standard
Control Arm Color
Noir
Bushing Material
Steel
Mounting Hardware Included
Oui
Package Contents
1 Bolt
Adjustable
No
Grease Fitting Included
Non
Bushing Material
Acero goma
Ball Joint Installed
Oui
Contenidos del paquete
1 brazo de suspensión
Contenidos del paquete
1 perno
Contenidos del paquete
1 rótula
Adjustable
Non
Ball Joint Included
Oui
Grease Fitting Included
No
Grease Fitting Included
No
Control Arm Construction
Estampado
Ball Joint Stud Length
40.14
Mounting Hole Quantity
0
Articulación de rótula instalada
Ball Joint Installed
Yes
Contenidos del paquete
1 tuerca
Adjustable
No
Ball Joint Included
Bushing Material
Rubber
Mounting Hardware Included
Yes

Oui c'est le cas.

Veuillez vous assurer de suivre les étapes ci-dessous :

1/ Téléchargez le package depuis themeforest.net (le fichier est au format zip)

2/ Extrayez le fichier que vous venez de télécharger.

3/ Trouvez ce fichier : ella-3.0.0-sections-ready.zip dans le dossier Ella Sections Ready 3.0.0, il vous suffit ensuite de télécharger le fichier ella-3.0.0-sections-ready.zip sur votre boutique Shopify.

Pour gagner du temps et contacter notre assistance rapidement, veuillez suivre les étapes ci-dessous :

1/ Créez un compte personnel pour nous (avec l'autorisation Thèmes et l'autorisation Paramètres) http://docs.shopify.com/manual/settings/account/staff-members

2/ Capturez une capture d'écran ou une vidéo pour le problème que vous rencontrez.

3/ Précisez le modèle et la version que vous utilisez.

4/ Décrivez clairement comment reproduire le problème.

5/ Envoyez toutes les informations (compte du personnel, capture d'écran, vidéo, nom et version du modèle, description des problèmes, lien) à email@domain.com

Oui, nous vous aiderons à installer le modèle si nécessaire

Oui. Merci d'envoyer vos demandes de personnalisation à email@domain.com , nous vous ferons parvenir notre devis. Merci.

Oui. Vous pouvez activer/désactiver l'animation dans la page Paramètres.

Oui. Vous pouvez activer/désactiver presque tous les blocs de la page (produits en vedette, diaporama, bannières, produits associés, produits récents,...).

Oui, nous avons un paramètre vous permettant de basculer entre ces deux options : Afficher au survol et Afficher au clic.

Le package de thème comprend une source de thème, des fichiers de conception Photoshop, des exemples de données et un guide manuel.

Ce n'est pas un problème. Il vous suffit de modifier le rapport largeur/hauteur dans les paramètres du thème.

Brand Label Part Number
Tesla 102732200D
Mevotech Supreme CMS95136
Tesla 102732200E

SEE WHAT OUR CUSTOMERS HAVE TO SAY

Votre panier

×